|
 Milling cutter grinder MR-X3
1.Portable idiot milling cutter grinder,can grind double edges, thrree edges, four edges, six edges milling cuter.
2.Grinding is accurate and rapid, easy operation, with no skill requirement to grind easily.
3.With Taiwan diamond grinding wheel, only one piece can complete all procedures. It can be equipped directil with an accurate angle and long service life.
Mills diameter：ф4-ф14
Power：AC220V/180W
Speed：5300RPM
Point angle...
|
| Detail>> |
|
| |
|
Milling cutter grinder MR-X5
1.Portable idiot milling cutter grinder,can grind double edges, thrree edges, four edges, six edges milling cuter.
2.Grinding is accurate and rapid, easy operation, with no skill requirement to grind easily.
3.With Taiwan diamond grinding wheel, only one piece can complete all procedures. It can be equipped directil with an accurate angle and long service life.
Mills diameter：ф13-ф30
Power：AC220V/450W
Speed：4000RPM
Point angle：0°-5&d...
|
| Detail>> |
|
| |
|
Milling cutter grinder MR-X3B
1.The straight handle end mill (2 edges, 3 edges, 4 edges) grinds after this aircraft, to work piece processing procedure, but the synchronization carries on drills, mill, cutting. Has exempted the other drill hole troublesome working procedure, achieves time-saving, saves the manpower, also saves the energy
2.1 minute rubs 1 milling cutter; Knife cutting edge center attrition: Grinds accurate to reach as high as 0.02mm
3.This aircraft uses the diamond grinding wheel, beca...
|
| Detail>> |
|
| |
|
Complex grinder machine mill & drill
1.Complex grinder machine mill&drill.
2.Products festure：operation,save cost.
3.Send you CBN or SDC(alternative),long service life.
4.The milling cutter can grind double sdge,three edge,four sdge,six sdge and so on.
5.This product has china national patent.
6.Drill bit can sharpen the drill bit front angle,back angle and front angle,you also can control the centre spot at random instend of centre drill,easy vent scraps,relax drill.
MR-...
|
| Detail>> |
|
| |
|
Milling cutter sharpening machine MR-6020
Feature: Easy to operate, grinding smoothly and steady. Specially made main axle enable free rotation, little frictional force, high precision and long service life.
- Applicable to #2, 3, 4, 6 flute HSS end mill, spiral end mill
- Motor: 220V/O, 25KW / 50HZ/2800RPM
- Operation time: complete in 2 minutes, including setup time for 13mm2 flutes and mill
Adopted open style layout structure, increased grinding operation space and area. Can be used to grindin...
|
| Detail>> |
|
| |
|
Site:Home > Products > Milling cutter grind 
